Liagle Tape In Mud

• Tape in Mud™ is a combination of polyacrylonitrile fibre, polyester fibre and cellulose wood fibres in various lengths And diameters.
• Tape in Mud™  is a fibre reinforcement additive to drywall taping compound. It turns regular taping mud into tapeless joint compound.
• When fibres mix with regular drywall joint compound at the best ratio, fibres cross link to each other and form a 3D structural mat like a dryer sheet in the mud. It serves like a fibre mat tape in the mud. That’s how liagle tapeless drywall finishing- tape in mud™ Works.
• apply the fiber reinforced joint compound directly to the joints without embedding any drywall tapes.
• Pre-fill, tape installation, and a filling process can be done by just one coat of Tapeless drywall joint compound.
• Joint compound with Tape in Mud™ mixed in it has higher bonding and tensile strength, lower shrinkage, no plastic shrinkage cracks, and drys faster. 
• The joints are welded by tapeless mud, much stronger than drywall itself and have higher flexibility. 
•  It can save about 40% of labor time.

Mixing Directions

Mixing with premixed joint compound:

• Put 1 box of 17 Liters premixed joint compound in a 5 gallon bucket. Add 2 bags of Tape In Mud™ to the bucket, for the first coat of mudding.
• Mix only One bag of Tape In Mud™ with 1  box  of  17  litres  premixed joint compound for second coat.
• Adding water gradually while mixing.

Mixing with setting compound powder:

• Put 1 bag ( 8-12 kg) of  the  setting-type compound in a clean and dry 5 gallon pail.
• Put  1 bag Tape In Mud™ in the bucket, mix with paddle and drill for 5 minutes.
• Make sure the fibres are dispersed uniformly in the powder.